emd3 / umd3n / imd3a transistors rev.d 1/3 general purpose (dual digital transistors) emd3 / umd3n / imd3a z features 1) both the dta114e chip and dtc114e chip in a emt or umt or smt package. 2) mounting possible with emt3 or umt3 or smt3 automatic mounting machines. 3) transistor elements are independent, eliminating interference. 4) mounting cost and area can be cut in half. z structure epitaxial planar type npn / pnp silicon transistor (built-in resistor type) the following characteristics apply to both the dtr 1 and dtr 2 , however, the ? ? ? sign on dtr 2 values for the pnp type have been omitted. z equivalent circuits emd3 / umd3n imd3a dtr 2 dtr 1 (3) (2) (1) (3) (2) (1) (4) (5) (6) (4) (5) (6) r 1 r 2 r 2 r 1 dtr 2 dtr 1 r 1 r 2 r 2 r 1 r 2 =10k? r 1 =10k? r 2 =10k? r 1 =10k? z absolute maximum ratings (ta=25 c) parameter symbol limits unit v cc 50 v ?10 v v in 40 i o 50 ma i c (max.) 100 tj 150 ?c tstg ?55 to + 150 ?c pd emd3, umd3n 150 (total) mw imd3a 300 (total) ? 1 ? 2 supply voltage input voltage output current junction temperature storage temperature power dissipation ? 1 120mw per element must not be exceeded. ? 2 200mw per element must not be exceeded. z dimensions (unit : mm) rohm : emt6 emd3 rohm : umt6 eiaj : sc-88 umd3n (6) (5) (4) (1) (2) (3) (6) (5) (4) (1) (2) (3) (4) (5) (6) (3) (2) (1) abbreviated symbol : d3 abbreviated symbol : d3 abbreviated symbol : d3 rohm : smt6 eiaj : sc-74 imd3a each lead has same dimensions each lead has same dimensions each lead has same dimensions
emd3 / umd3n / imd3a transistors rev.d 2/3 z electrical characteristics (ta=25 c) parameter symbol i i r 1 g i r 2 /r 1 min. ? 3 ? ? ? 7 30 0.8 ? ? 0.1 ? ? 10 ? 1 0.5 ? 0.3 0.88 0.5 13 ? 1.2 v v cc = 5v, i o = 100a v o = 0.3v, i o =10 ma i o = 10ma, i i = 0.5ma v i = 5v v cc = 50v, v i = 0v ? v o = 5v, i o = 5ma v ma a k? ? ?? typ. max. unit conditions v i (off) v i (on) v o (on) i o (off) f t ? 250 ? v ce = 10v, i e = ?5ma, f = 100mhz ? mhz ? transition frequency of the device input voltage output voltage input current output current input resistance dc current gain transition frequency resistance ratio z packaging specifications package code tr t108 3000 3000 taping basic ordering unit (pieces) umd3n t2r 8000 emd3 imd3a type z electrical characteristic curves dtr 1 (npn) input voltage : v i (on) (v) output current : i o (a) 100 200 500 1m 2m 5m 10m 20m 50m 100m 100 50 20 10 5 2 1 500m 200m 100m v o =0.3v ta=?40?c 25?c 100?c fig.1 input voltage vs. output current (on characteristics) input voltage : v i (off) (v) output current : io (a) 03 10m 1 2m 5m 1m 200 500 100 20 50 10 2 5 0.5 1 1.5 2 2.5 v cc =5v ta=100?c 25?c ?40?c fig.2 output current vs. input voltage (off characteristics) output current : i o (a) dc current gain : g i 100 200 500 1m 2m 5m 10m 20m 50m100m 1k 500 200 100 50 20 10 5 2 1 v o =5v ta=100?c 25?c ?40?c fig.3 dc current gain vs. output current
emd3 / umd3n / imd3a transistors rev.d 3/3 output current : i o (a) output voltage : v o (on) (v) 100 200 500 1m 2m 5m 10m 20m 50m 100m 1 500m 200m 100m 50m 20m 10m 5m 2m 1m l o /l i =20 ta=100?c 25?c ?40?c fig.4 output voltage vs. output current dtr 2 (pnp) v o =? 0.3v input voltage : v i (on) (v) output current : i o (a) ? 100 ? 50 ? 20 ? 10 ? 200m ? 100m ?100 ?1m ?10m ?100m ?200 ?2m ?20m ?500 ?5m ?50m ? 5 ? 2 ? 1 ? 500m 25?c 100?c ta=?40?c fig.5 input voltage vs. output current (on characteristics) v cc = ? 5v 0 ? 3 ? 10m ? 1 ? 2m ? 5m ? 1m ? 200 ? 500 ? 100 ? 20 ? 50 ? 10 ? 2 ? 5 ? 0.5 ? 1 ? 1.5 ? 2 ? 2.5 input voltage : v i (off) (v) output current : io (a) ta=100?c 25?c ?40?c fig.6 output current vs. input voltage (off characteristics) v o = ?5v ta=100?c 25?c ?40?c dc current gain : g i output current : i o (a) 1k 500 200 100 50 20 10 5 2 1 ? 100? 1m ? 10m ? 100m ? 200? 2m ? 20m ? 500? 5m ? 50m fig.7 dc current gain vs. output current l o /l i =20 ta=100?c 25?c ?40?c ? 1 ? 500m ? 200m ? 100m ? 10m ? 50m ? 5m ? 20m ? 2m ? 1m output current : i o (a) output voltage : v o (on) (v) ? 100 ? 1m ? 10m ? 100m ? 200 ? 2m ? 20m ? 500? 5m ? 50m fig.8 output voltage vs. output current
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / europe / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2008 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21 saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
